1. FCC ID Search
  2. EDAN INSTRUMENTS, INC.
  3. SMQ-UWM1

FCC ID SMQ-UWM1

5MQ-UWM1, 5MQ-UWMI, 5MQUWM1, 5MQUWMI, SMQ-UWM1, SMQ-UWMI, SMQUWM1, SMQUWMI

Wi-Fi Module -UWM1 EDAN INSTRUMENTS, INC.

An FCC ID is a unique identifier assigned by the Federal Communications Commission (FCC) to identify wireless radio frequency devices available on the market. The FCC assigns a 3- or 5-character Grantee Code to indicate the company responsible for manufacturing the device. For the current product, the FCC ID is SMQ-UWM1, where the Grantee Code is SMQ. The remaining portion of the ID, -UWM1, is typically associated with the product model, though it may also be a randomly chosen string determined by the applicant.

The current product (model -UWM1) is manufactured by EDAN INSTRUMENTS, INC.. It complies with the Federal Communications Commission (FCC) requirements and is classified under the equipment class as DTS - Digital Transmission System, The equipment notes indicate that the product is a Wi-Fi Module.

In addition to the application documents, the FCC also publishes internal and external photographs of the device, user manuals, and test reports. These materials can be viewed under the "Exhibits" tab below.

FCC Registration Number
0022565113
Manufactured By
EDAN INSTRUMENTS, INC.
Tested By
Shenzhen CTL Testing Technology Co., Ltd.
Equipment Class(es)
  • DTS - Digital Transmission System
  • NII - Unlicensed National Information Infrastructure TX
Equipment Note(s)
  • Wi-Fi Module
  • Wi-Fi Module
Original Data Source
FCC.gov Official

Applications

Frequencies

FCC ID SMQ-UWM1 Frequencies List ALL

FCC ID SMQ-UWM1 Frequencies List #1

  • App #
    Frequency Range
    Power Output
    Tolerance
    Emission Designator
    Rule Parts
    Grant Notes
  • 1.1
    2412.0 - 2462.0
    0.0542000
    15C
    CC

    • * total 5 frequency items

FCC ID SMQ-UWM1 Frequencies List #2

Exhibits

FCC ID SMQ-UWM1 Exhibits List ALL

FCC ID SMQ-UWM1 Exhibits List #1

FCC ID SMQ-UWM1 Exhibits List #2

Application Forms

FCC ID SMQ-UWM1 Application Forms #1

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: EDAN INSTRUMENTS, INC.
FCC Registration Number (FRN): 0022565113
Line one: #15 Jinhui Road, Jinsha Community,
Line two: Kengzi Sub-District, Pingshan District
P.O. Box:
City: Shenzhen
State: N/A
Country: China
Zip Code: 518122

TCB Information
TCB Application Email Address: o.kneip@kl-certification.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: SMQ Product Code: -UWM1

Person at the applicant's address to receive grant or for contact
First Name: Huanhuan
Middle Name:
Last Name: Xia
Title:
Telephone Number: 0086 755 26682547 Extension:
Fax Number: 0086 755 26882223
Email: xiahuanhuan@edan.com.cn
Mail Stop:


Technical Contact
Firm Name:
First Name:
Middle Name:
Last Name:
Line 1:
Line 2:
P.O. Box:
City:
State:
Country:
Zip Code:
Telephone Number: Extension:
Fax Number:
E-Mail:

Non Technical Contact
Firm Name: HOORAY INDUSTRY LLC
First Name: Cindy
Middle Name:
Last Name: Wu
Line 1: 1408 Pinon Place, Fullerton,
Line 2: CA 92835, United States
P.O. Box:
City:
State:
Country: United States
Zip Code:
Telephone Number: (626) 910-5808 Extension:
Fax Number:
E-Mail: cindynewhope@gmail.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wi-Fi Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No

The related application is in the process of being filed under the FCC ID(s)

Equipment Specifications
Line
Entry		 Lower
Frequency		 Upper
Frequency		 Power
Output		 Tolerance Emission
Designator		 Microprocessor
Number		 Rule
Parts		 Grant
Notes
1 2412.00000000 2462.00000000 0.0542000 15C CC

Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Shenzhen CTL Testing Technology Co., Ltd.
First Name:   Tracy
Last Name:   Qi
Telephone Number: 86-755-89486194 Extension:
Fax Number: 
E-mail:  qihui@ctl-lab.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
CIIPC as new antenna added. Single Modular Approval. Output power listed is peak conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. This module is restricted to installation in products for use only in mobile and fixed applications. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device supports 802.11b, 802.11g, 802.11n and 802.11ax with a 20 MHz and 40 MHz bandwidth mode.

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Huanhuan Xia
Title of authorized signature:  Engineers

Complete items below if agent signs the application:

Firm Name: 
First Name: 
Middle Name: 
Last Name: 
Line 1: 
Line 2: 
P.O. Box: 
City: 
State: 
Country: 
Zip Code: 
Telephone Number:  Extension: 
Fax Number: 
E-mail: 

FCC ID SMQ-UWM1 Application Forms #2

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: EDAN INSTRUMENTS, INC.
FCC Registration Number (FRN): 0022565113
Line one: #15 Jinhui Road, Jinsha Community,
Line two: Kengzi Sub-District, Pingshan District
P.O. Box:
City: Shenzhen
State: N/A
Country: China
Zip Code: 518122

TCB Information
TCB Application Email Address: o.kneip@kl-certification.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: SMQ Product Code: -UWM1

Person at the applicant's address to receive grant or for contact
First Name: Huanhuan
Middle Name:
Last Name: Xia
Title:
Telephone Number: 0086 755 26682547 Extension:
Fax Number: 0086 755 26882223
Email: xiahuanhuan@edan.com.cn
Mail Stop:


Technical Contact
Firm Name:
First Name:
Middle Name:
Last Name:
Line 1:
Line 2:
P.O. Box:
City:
State:
Country:
Zip Code:
Telephone Number: Extension:
Fax Number:
E-Mail:

Non Technical Contact
Firm Name: HOORAY INDUSTRY LLC
First Name: Cindy
Middle Name:
Last Name: Wu
Line 1: 1408 Pinon Place, Fullerton,
Line 2: CA 92835, United States
P.O. Box:
City:
State:
Country: United States
Zip Code:
Telephone Number: (626) 910-5808 Extension:
Fax Number:
E-Mail: cindynewhope@gmail.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wi-Fi Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No

The related application is in the process of being filed under the FCC ID(s)

Equipment Specifications
Line
Entry		 Lower
Frequency		 Upper
Frequency		 Power
Output		 Tolerance Emission
Designator		 Microprocessor
Number		 Rule
Parts		 Grant
Notes
1 5180 5240 0.0329 15E CC
2 5260 5320 0.025 15E CC,ND
3 5500 5700 0.0202 15E CC,ND
4 5745 5825 0.0186 15E CC

Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Shenzhen CTL Testing Technology Co., Ltd.
First Name:   Tracy
Last Name:   Qi
Telephone Number: 86-755-89486194 Extension:
Fax Number: 
E-mail:  qihui@ctl-lab.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
CIIPC as new antenna added. Single Modular Approval. Output power listed is average conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. This module is restricted to installation in products for use only in mobile and fixed applications. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device supports 802.11a, 802.11n, 802.11ac and 802.11ax with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection.

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Huanhuan Xia
Title of authorized signature:  Engineers

Complete items below if agent signs the application:

Firm Name: 
First Name: 
Middle Name: 
Last Name: 
Line 1: 
Line 2: 
P.O. Box: 
City: 
State: 
Country: 
Zip Code: 
Telephone Number:  Extension: 
Fax Number: 
E-mail: 

Grants

FCC ID SMQ-UWM1 EAS Grant #1

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

EDAN INSTRUMENTS, INC.
#15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District
Shenzhen, 518122
China 		  Date of Grant: 07/16/2026

Application Dated: 07/16/2026
 
Attention: Huanhuan Xia ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMQ-UWM1
Name of Grantee:  EDAN INSTRUMENTS, INC.
Equipment Class: Digital Transmission System
Notes: Wi-Fi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.0542  

CIIPC as new antenna added. Single Modular Approval. Output power listed is peak conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. This module is restricted to installation in products for use only in mobile and fixed applications. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device supports 802.11b, 802.11g, 802.11n and 802.11ax with a 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA479444

FCC ID SMQ-UWM1 TCB Grant #1

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  KL-Certification GmbH
Heinrich-Hertz-Allee 7
St. Ingbert, 66386
Germany 		Date of Grant: 07/16/2026

Application Dated: 07/16/2026
EDAN INSTRUMENTS, INC.
#15 Jinhui Road, Jinsha Community,
Kengzi Sub-District, Pingshan District
Shenzhen, 518122
China
 
Attention: Huanhuan Xia ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMQ-UWM1
Name of Grantee:  EDAN INSTRUMENTS, INC.
Equipment Class: Digital Transmission System
Notes: Wi-Fi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.0542  

CIIPC as new antenna added. Single Modular Approval. Output power listed is peak conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. This module is restricted to installation in products for use only in mobile and fixed applications. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device supports 802.11b, 802.11g, 802.11n and 802.11ax with a 20 MHz and 40 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.

FCC ID SMQ-UWM1 TCB Grant #2

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  KL-Certification GmbH
Heinrich-Hertz-Allee 7
St. Ingbert, 66386
Germany 		Date of Grant: 07/16/2026

Application Dated: 07/16/2026
EDAN INSTRUMENTS, INC.
#15 Jinhui Road, Jinsha Community,
Kengzi Sub-District, Pingshan District
Shenzhen, 518122
China
 
Attention: Huanhuan Xia ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMQ-UWM1
Name of Grantee:  EDAN INSTRUMENTS, INC.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0329  
CC ND 15E 5260.0  -  5320.0 0.025  
CC ND 15E 5500.0  -  5700.0 0.0202  
CC 15E 5745.0  -  5825.0 0.0186  

CIIPC as new antenna added. Single Modular Approval. Output power listed is average conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. This module is restricted to installation in products for use only in mobile and fixed applications. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device supports 802.11a, 802.11n, 802.11ac and 802.11ax with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

FCC ID SMQ-UWM1 EAS Grant #2

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

EDAN INSTRUMENTS, INC.
#15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District
Shenzhen, 518122
China 		  Date of Grant: 07/16/2026

Application Dated: 07/16/2026
 
Attention: Huanhuan Xia ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SMQ-UWM1
Name of Grantee:  EDAN INSTRUMENTS, INC.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0329  
CC ND 15E 5260.0  -  5320.0 0.025  
CC ND 15E 5500.0  -  5700.0 0.0202  
CC 15E 5745.0  -  5825.0 0.0186  

CIIPC as new antenna added. Single Modular Approval. Output power listed is average conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. This module is restricted to installation in products for use only in mobile and fixed applications. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device supports 802.11a, 802.11n, 802.11ac and 802.11ax with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:


EA960810