An FCC ID is a unique identifier assigned by the Federal Communications Commission (FCC) to identify wireless radio frequency devices available on the market.
The FCC assigns a 3- or 5-character Grantee Code to indicate the company responsible for manufacturing the device.
For the current product, the FCC ID is 2BWU7-V5, where the Grantee Code is 2BWU7.
The remaining portion of the ID, -V5, is typically associated with the product model, though it may also be a randomly chosen string determined by the applicant.
The current product (model -V5) is manufactured by Shenzhen Linland Youpin Technology Co., Ltd.
It complies with the Federal Communications Commission (FCC) requirements and is classified under the equipment class as DSS - Part 15 Spread Spectrum Transmitter,
The equipment notes indicate that the product is a Projector.
In addition to the application documents, the FCC also publishes internal and external photographs of the device, user manuals, and test reports.
These materials can be viewed under the "Exhibits" tab below.
Application for Equipment Authorization FCC Form 731 TCB Version
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
FCC ID 2BWU7-V5 Application Forms #2
Application for Equipment Authorization FCC Form 731 TCB Version
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
FCC ID 2BWU7-V5 Application Forms #3
Application for Equipment Authorization FCC Form 731 TCB Version
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Date of Grant: 07/14/2026
Application Dated: 07/14/2026
Shenzhen Linland Youpin Technology Co., Ltd
2F558, Area B, Gushu Huating, No. 38
Gushu 1st Road, Guxing Community,
Xixiang Street, Bao'an District, Shenzhen, China
Attention: Terry Hu ,
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
FCC IDENTIFIER:
2BWU7-V5
Name of Grantee:
Shenzhen Linland Youpin Technology Co., Ltd
Equipment Class:
Part 15 Spread Spectrum Transmitter
Notes:
Projector
Grant Notes
FCC Rule Parts
Frequency Range (MHZ)
Output Watts
Frequency Tolerance
Emission Designator
CC
15C
2402.0
-
2480.0
0.0019
Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
CC:
This device is certified pursuant to two different Part 15 rules sections.
FCC ID 2BWU7-V5 EAS Grant #1
COPY
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
FCC IDENTIFIER:
2BWU7-V5
Name of Grantee:
Shenzhen Linland Youpin Technology Co., Ltd
Equipment Class:
Part 15 Spread Spectrum Transmitter
Notes:
Projector
Modular Type:
Does not apply
Grant Notes
FCC Rule Parts
Frequency Range (MHZ)
Output Watts
Frequency Tolerance
Emission Designator
CC
15C
2402.0
-
2480.0
0.0019
Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
CC:
This device is certified pursuant to two different Part 15 rules sections.
Mail To:
EA175730
FCC ID 2BWU7-V5 EAS Grant #2
COPY
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
FCC IDENTIFIER:
2BWU7-V5
Name of Grantee:
Shenzhen Linland Youpin Technology Co., Ltd
Equipment Class:
Digital Transmission System
Notes:
Projector
Modular Type:
Does not apply
Grant Notes
FCC Rule Parts
Frequency Range (MHZ)
Output Watts
Frequency Tolerance
Emission Designator
CC
15C
2402.0
-
2480.0
0.0022
CC
15C
2412.0
-
2462.0
0.0069
Output power listed is conducted. The device contains 20MHz and 40MHz bandwidth mode.(For WIFI 2.4g) The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
CC:
This device is certified pursuant to two different Part 15 rules sections.
Mail To:
EA494033
FCC ID 2BWU7-V5 TCB Grant #2
TCB
GRANT OF EQUIPMENT AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:
LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Date of Grant: 07/14/2026
Application Dated: 07/14/2026
Shenzhen Linland Youpin Technology Co., Ltd
2F558, Area B, Gushu Huating, No. 38
Gushu 1st Road, Guxing Community,
Xixiang Street, Bao'an District, Shenzhen, China
Attention: Terry Hu ,
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
FCC IDENTIFIER:
2BWU7-V5
Name of Grantee:
Shenzhen Linland Youpin Technology Co., Ltd
Equipment Class:
Digital Transmission System
Notes:
Projector
Grant Notes
FCC Rule Parts
Frequency Range (MHZ)
Output Watts
Frequency Tolerance
Emission Designator
CC
15C
2402.0
-
2480.0
0.0022
CC
15C
2412.0
-
2462.0
0.0069
Output power listed is conducted. The device contains 20MHz and 40MHz bandwidth mode.(For WIFI 2.4g) The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
CC:
This device is certified pursuant to two different Part 15 rules sections.
FCC ID 2BWU7-V5 EAS Grant #3
COPY
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
FCC IDENTIFIER:
2BWU7-V5
Name of Grantee:
Shenzhen Linland Youpin Technology Co., Ltd
Equipment Class:
Unlicensed National Information Infrastructure TX
Notes:
Projector
Modular Type:
Does not apply
Grant Notes
FCC Rule Parts
Frequency Range (MHZ)
Output Watts
Frequency Tolerance
Emission Designator
CC
15E
5180.0
-
5240.0
0.0121
CC
15E
5745.0
-
5825.0
0.0067
Output power listed is conducted. The device contains 20MHz and 40MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
CC:
This device is certified pursuant to two different Part 15 rules sections.
Mail To:
EA794998
FCC ID 2BWU7-V5 TCB Grant #3
TCB
GRANT OF EQUIPMENT AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:
LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Date of Grant: 07/14/2026
Application Dated: 07/14/2026
Shenzhen Linland Youpin Technology Co., Ltd
2F558, Area B, Gushu Huating, No. 38
Gushu 1st Road, Guxing Community,
Xixiang Street, Bao'an District, Shenzhen, China
Attention: Terry Hu ,
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
FCC IDENTIFIER:
2BWU7-V5
Name of Grantee:
Shenzhen Linland Youpin Technology Co., Ltd
Equipment Class:
Unlicensed National Information Infrastructure TX
Notes:
Projector
Grant Notes
FCC Rule Parts
Frequency Range (MHZ)
Output Watts
Frequency Tolerance
Emission Designator
CC
15E
5180.0
-
5240.0
0.0121
CC
15E
5745.0
-
5825.0
0.0067
Output power listed is conducted. The device contains 20MHz and 40MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
CC:
This device is certified pursuant to two different Part 15 rules sections.