1. FCC ID Search
  2. SiFli Technologies (Nanjing) Co., Ltd.
  3. 2BVUV-SF32LB56

FCC ID 2BVUV-SF32LB56

2BVUV-5F32LB56, 2BVUV-SF32LB56, 2BVUV-SF32LBS6, 2BVUV5F32LB56, 2BVUVSF32LB56, 2BVUVSF32LBS6, ZBVUV-5F3ZLB56, ZBVUV-SF3ZLB56, ZBVUV-SF3ZLBS6, ZBVUV5F3ZLB56, ZBVUVSF3ZLB56, ZBVUVSF3ZLBS6

MCU+BT Module -SF32LB56 SiFli Technologies (Nanjing) Co., Ltd.

An FCC ID is a unique identifier assigned by the Federal Communications Commission (FCC) to identify wireless radio frequency devices available on the market. The FCC assigns a 3- or 5-character Grantee Code to indicate the company responsible for manufacturing the device. For the current product, the FCC ID is 2BVUV-SF32LB56, where the Grantee Code is 2BVUV. The remaining portion of the ID, -SF32LB56, is typically associated with the product model, though it may also be a randomly chosen string determined by the applicant.

The current product (model -SF32LB56) is manufactured by SiFli Technologies (Nanjing) Co., Ltd.. It complies with the Federal Communications Commission (FCC) requirements and is classified under the equipment class as DSS - Part 15 Spread Spectrum Transmitter, The equipment notes indicate that the product is a MCU+BT Module.

In addition to the application documents, the FCC also publishes internal and external photographs of the device, user manuals, and test reports. These materials can be viewed under the "Exhibits" tab below.

FCC Registration Number
0038349825
Manufactured By
SiFli Technologies (Nanjing) Co., Ltd.
Tested By
Shenzhen Morlab Communications Technology Co. Ltd.
Equipment Class(es)
  • DSS - Part 15 Spread Spectrum Transmitter
  • DTS - Digital Transmission System
Equipment Note(s)
  • MCU+BT Module
  • MCU+BT Module
Original Data Source
FCC.gov Official

Applications

Frequencies

FCC ID 2BVUV-SF32LB56 Frequencies List ALL

FCC ID 2BVUV-SF32LB56 Frequencies List #1

  • App #
    Frequency Range
    Power Output
    Tolerance
    Emission Designator
    Rule Parts
    Grant Notes
  • 1.1
    2402.0 - 2480.0
    0.0238800
    15C
    CC

    • * total 2 frequency items

FCC ID 2BVUV-SF32LB56 Frequencies List #2

  • App #
    Frequency Range
    Power Output
    Tolerance
    Emission Designator
    Rule Parts
    Grant Notes
  • 2.1
    2402.0 - 2480.0
    0.0043600
    15C
    CC

    • * total 2 frequency items

Exhibits

FCC ID 2BVUV-SF32LB56 Exhibits List ALL

FCC ID 2BVUV-SF32LB56 Exhibits List #1

FCC ID 2BVUV-SF32LB56 Exhibits List #2

Application Forms

FCC ID 2BVUV-SF32LB56 Application Forms #1

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: SiFli Technologies (Nanjing) Co., Ltd.
FCC Registration Number (FRN): 0038349825
Line one: 419-13, Building B, No. 320 Pubin Road,
Line two: Nanjing Area, Jiangsu Free Trade Zone
P.O. Box:
City: Nanjing
State: N/A
Country: China
Zip Code: 210031

TCB Information
TCB Application Email Address: bentje.holger@phoenix-testlab.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: 2BVUV Product Code: -SF32LB56

Person at the applicant's address to receive grant or for contact
First Name: Mo
Middle Name:
Last Name: Zhang
Title:
Telephone Number: 86 18017763602 Extension:
Fax Number: N/A
Email: mozhang@sifli.com
Mail Stop:


Technical Contact
Firm Name:
First Name:
Middle Name:
Last Name:
Line 1:
Line 2:
P.O. Box:
City:
State:
Country:
Zip Code:
Telephone Number: Extension:
Fax Number:
E-Mail:

Non Technical Contact
Firm Name: FCC US Agent, LLC
First Name: Tim
Middle Name:
Last Name: Payne
Line 1: 3722 Illinois Avenue
Line 2:
P.O. Box:
City: Saint Charles
State:
Country: United States
Zip Code: 60174
Telephone Number: 708-571-3148 Extension:
Fax Number:
E-Mail: Support@FCCUSAgent.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   01/07/2027
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): MCU+BT Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No

The related application is in the process of being filed under the FCC ID(s) 2BVUV-SF32LB56

Equipment Specifications
Line
Entry		 Lower
Frequency		 Upper
Frequency		 Power
Output		 Tolerance Emission
Designator		 Microprocessor
Number		 Rule
Parts		 Grant
Notes
1 2402.00000000 2480.00000000 0.0238800 15C CC

Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Shenzhen Morlab Communications Technology Co. Ltd.
First Name:   Mr. Su
Last Name:   Feng
Telephone Number: 86-755-36698566 Extension:
Fax Number: 
E-mail:  Zx.sun@morlab.cn

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power is maximum peak conducted. <br> This device has integrated DSS and DTS transmitters certified under the same FCC ID. <br> Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). <br> The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Wendy Zhan
Title of authorized signature: 

Complete items below if agent signs the application:

Firm Name: 
First Name: 
Middle Name: 
Last Name: 
Line 1: 
Line 2: 
P.O. Box: 
City: 
State: 
Country: 
Zip Code: 
Telephone Number:  Extension: 
Fax Number: 
E-mail: 

FCC ID 2BVUV-SF32LB56 Application Forms #2

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: SiFli Technologies (Nanjing) Co., Ltd.
FCC Registration Number (FRN): 0038349825
Line one: 419-13, Building B, No. 320 Pubin Road,
Line two: Nanjing Area, Jiangsu Free Trade Zone
P.O. Box:
City: Nanjing
State: N/A
Country: China
Zip Code: 210031

TCB Information
TCB Application Email Address: bentje.holger@phoenix-testlab.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: 2BVUV Product Code: -SF32LB56

Person at the applicant's address to receive grant or for contact
First Name: Mo
Middle Name:
Last Name: Zhang
Title:
Telephone Number: 86 18017763602 Extension:
Fax Number: N/A
Email: mozhang@sifli.com
Mail Stop:


Technical Contact
Firm Name:
First Name:
Middle Name:
Last Name:
Line 1:
Line 2:
P.O. Box:
City:
State:
Country:
Zip Code:
Telephone Number: Extension:
Fax Number:
E-Mail:

Non Technical Contact
Firm Name: FCC US Agent, LLC
First Name: Tim
Middle Name:
Last Name: Payne
Line 1: 3722 Illinois Avenue
Line 2:
P.O. Box:
City: Saint Charles
State:
Country: United States
Zip Code: 60174
Telephone Number: 708-571-3148 Extension:
Fax Number:
E-Mail: Support@FCCUSAgent.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   01/07/2027
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): MCU+BT Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No

The related application is in the process of being filed under the FCC ID(s) 2BVUV-SF32LB56

Equipment Specifications
Line
Entry		 Lower
Frequency		 Upper
Frequency		 Power
Output		 Tolerance Emission
Designator		 Microprocessor
Number		 Rule
Parts		 Grant
Notes
1 2402.00000000 2480.00000000 0.0043600 15C CC

Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Shenzhen Morlab Communications Technology Co. Ltd.
First Name:   Mr. Su
Last Name:   Feng
Telephone Number: 86-755-36698566 Extension:
Fax Number: 
E-mail:  Zx.sun@morlab.cn

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power is maximum peak conducted. <br> This device has integrated DSS and DTS transmitters certified under the same FCC ID. <br> Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). <br> The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Wendy Zhan
Title of authorized signature: 

Complete items below if agent signs the application:

Firm Name: 
First Name: 
Middle Name: 
Last Name: 
Line 1: 
Line 2: 
P.O. Box: 
City: 
State: 
Country: 
Zip Code: 
Telephone Number:  Extension: 
Fax Number: 
E-mail: 

Grants

FCC ID 2BVUV-SF32LB56 TCB Grant #1

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany 		Date of Grant: 07/12/2026

Application Dated: 07/10/2026
SiFli Technologies (Nanjing) Co., Ltd.
419-13, Building B, No. 320 Pubin Road,
Nanjing Area, Jiangsu Free Trade Zone
Nanjing, 210031
China
 
Attention: Mo Zhang ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BVUV-SF32LB56
Name of Grantee:  SiFli Technologies (Nanjing) Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: MCU+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.02388  

Output power is maximum peak conducted.
This device has integrated DSS and DTS transmitters certified under the same FCC ID.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).
The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

CC: This device is certified pursuant to two different Part 15 rules sections.

FCC ID 2BVUV-SF32LB56 EAS Grant #1

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

SiFli Technologies (Nanjing) Co., Ltd.
419-13, Building B, No. 320 Pubin Road, Nanjing Area, Jiangsu Free Trade Zone
Nanjing, 210031
China 		  Date of Grant: 07/12/2026

Application Dated: 07/12/2026
 
Attention: Mo Zhang ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BVUV-SF32LB56
Name of Grantee:  SiFli Technologies (Nanjing) Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: MCU+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.02388  

Output power is maximum peak conducted.
This device has integrated DSS and DTS transmitters certified under the same FCC ID.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).
The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA242722

FCC ID 2BVUV-SF32LB56 TCB Grant #2

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany 		Date of Grant: 07/12/2026

Application Dated: 07/10/2026
SiFli Technologies (Nanjing) Co., Ltd.
419-13, Building B, No. 320 Pubin Road,
Nanjing Area, Jiangsu Free Trade Zone
Nanjing, 210031
China
 
Attention: Mo Zhang ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BVUV-SF32LB56
Name of Grantee:  SiFli Technologies (Nanjing) Co., Ltd.
Equipment Class: Digital Transmission System
Notes: MCU+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00436  

Output power is maximum peak conducted.
This device has integrated DSS and DTS transmitters certified under the same FCC ID.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).
The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

CC: This device is certified pursuant to two different Part 15 rules sections.

FCC ID 2BVUV-SF32LB56 EAS Grant #2

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

SiFli Technologies (Nanjing) Co., Ltd.
419-13, Building B, No. 320 Pubin Road, Nanjing Area, Jiangsu Free Trade Zone
Nanjing, 210031
China 		  Date of Grant: 07/12/2026

Application Dated: 07/12/2026
 
Attention: Mo Zhang ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BVUV-SF32LB56
Name of Grantee:  SiFli Technologies (Nanjing) Co., Ltd.
Equipment Class: Digital Transmission System
Notes: MCU+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00436  

Output power is maximum peak conducted.
This device has integrated DSS and DTS transmitters certified under the same FCC ID.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).
The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA319514