An FCC ID is a unique identifier assigned by the Federal Communications Commission (FCC) to identify wireless radio frequency devices available on the market.
The FCC assigns a 3- or 5-character Grantee Code to indicate the company responsible for manufacturing the device.
For the current product, the FCC ID is 2AYQQ-R6, where the Grantee Code is 2AYQQ.
The remaining portion of the ID, -R6, is typically associated with the product model, though it may also be a randomly chosen string determined by the applicant.
The current product (model -R6) is manufactured by Cheerlux ( Shenzhen) Electronic Technology Co., Ltd..
It complies with the Federal Communications Commission (FCC) requirements and is classified under the equipment class as DSS - Part 15 Spread Spectrum Transmitter,
The equipment notes indicate that the product is a Projector.
In addition to the application documents, the FCC also publishes internal and external photographs of the device, user manuals, and test reports.
These materials can be viewed under the "Exhibits" tab below.
Application for Equipment Authorization FCC Form 731 TCB Version
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
FCC ID 2AYQQ-R6 Application Forms #2
Application for Equipment Authorization FCC Form 731 TCB Version
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
FCC ID 2AYQQ-R6 Application Forms #3
Application for Equipment Authorization FCC Form 731 TCB Version
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION
COPY
Certification
Cheerlux ( Shenzhen) Electronic Technology Co., Ltd.
Room 201,Floor 2,Building 2,Longbi Industrial Zone No. 27,Dafa Road,Dafa Pu Community,Bantian Street,
Longgang District,Shenzhen,
China
Date of Grant: 07/13/2026
Application Dated: 07/13/2026
Attention: Angnex liu ,
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance.
CC:
This device is certified pursuant to two different Part 15 rules sections.
Mail To:
EA133294
FCC ID 2AYQQ-R6 TCB Grant #1
TCB
GRANT OF EQUIPMENT AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:
LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Room 201,Floor 2,Building 2,Longbi Industrial Zone
No. 27,Dafa Road,Dafa Pu Community,Bantian Street,
Longgang District,Shenzhen, China
Attention: Angnex liu ,
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance.
CC:
This device is certified pursuant to two different Part 15 rules sections.
FCC ID 2AYQQ-R6 TCB Grant #2
TCB
GRANT OF EQUIPMENT AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:
LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Room 201,Floor 2,Building 2,Longbi Industrial Zone
No. 27,Dafa Road,Dafa Pu Community,Bantian Street,
Longgang District,Shenzhen, China
Attention: Angnex liu ,
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance. This device contains 20MHz, 40MHz and 80M signal bandwidth.
CC:
This device is certified pursuant to two different Part 15 rules sections.
MO:
This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
FCC ID 2AYQQ-R6 EAS Grant #2
COPY
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION
COPY
Certification
Cheerlux ( Shenzhen) Electronic Technology Co., Ltd.
Room 201,Floor 2,Building 2,Longbi Industrial Zone No. 27,Dafa Road,Dafa Pu Community,Bantian Street,
Longgang District,Shenzhen,
China
Date of Grant: 07/13/2026
Application Dated: 07/13/2026
Attention: Angnex liu ,
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance. This device contains 20MHz, 40MHz and 80M signal bandwidth.
CC:
This device is certified pursuant to two different Part 15 rules sections.
MO:
This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
Mail To:
EA655848
FCC ID 2AYQQ-R6 EAS Grant #3
COPY
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION
COPY
Certification
Cheerlux ( Shenzhen) Electronic Technology Co., Ltd.
Room 201,Floor 2,Building 2,Longbi Industrial Zone No. 27,Dafa Road,Dafa Pu Community,Bantian Street,
Longgang District,Shenzhen,
China
Date of Grant: 07/13/2026
Application Dated: 07/13/2026
Attention: Angnex liu ,
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance. This device contains 20MHz and 40MHz signal bandwidth.
CC:
This device is certified pursuant to two different Part 15 rules sections.
MO:
This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
Mail To:
EA672467
FCC ID 2AYQQ-R6 TCB Grant #3
TCB
GRANT OF EQUIPMENT AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:
LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Room 201,Floor 2,Building 2,Longbi Industrial Zone
No. 27,Dafa Road,Dafa Pu Community,Bantian Street,
Longgang District,Shenzhen, China
Attention: Angnex liu ,
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance. This device contains 20MHz and 40MHz signal bandwidth.
CC:
This device is certified pursuant to two different Part 15 rules sections.
MO:
This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.